Skip header
 

netware

Use the “netware” command to view and configure the NetWare settings such as the print server name or file server name.

NetWare Printer Server Names

msh> netware pnamecharacter string

  • Enter the NetWare print server name using up to 47 characters.

NetWare File Server Names

msh> netware fname character string

  • Enter the NetWare file server name using up to 47 characters.

Encap type

msh> netware encap {802.3|802.2|snap|ethernet2|auto}

Remote Printer Number

msh> netware rnum [0-254]

  • The default is 0.

Timeout

msh> netware timeout [3-255]

  • The default is 15.

Printer server mode

msh> netware mode pserver

msh> netware mode ps

Remote printer mode

msh> netware mode rprinter

msh> netware mode rp

NDS context name

msh> netware context “character string”

SAP interval

msh> netware “sap_interval[0-3600]”

It can be entered between 0 and 3600 seconds.

Setting login mode for file server

msh> netware login server

Setting login mode for NDS tree

msh> netware login tree

Setting login mode for NDS tree name

msh> netware tree “NDS tree name”

File transfer protocol

msh> netware trans {ipv4pri|ipxpri|ipv4|ipx}

  • If you do not specify the protocol, the current setting is displayed.

Protocol

Set Protocol

ipv4pri

IPv4+IPX(IPv4)

ipxpri

IPv4+IPX(IPX)

ipv4

IPv4

ipx

IPX