Skip header
 

Changing the Network Interface Board Configuration

Follow the procedure below to change the network interface board configuration using SmartDeviceMonitor for Admin.

1Start SmartDeviceMonitor for Admin.

2On the [Group] menu, point to [Search Device], and then click [IPv4], [IPX/SPX] or [IPv4 SNMPv3].

A list of machines using the selected protocol appears.

Select the protocol of the machine whose configuration you want to change.

If you are using IPv4 SNMPv3, enter the user authentication.

3In the list, select a machine whose configuration you want to change.

4On the [Tools] menu, click [NIB Setup Tool].

Application screen illustration

A Web browser opens and the window for entering the login user name and password for the Web Image Monitor administrator appears.

NIB Setup Tool starts. Click [Web browser], and then click [OK].

5Enter the login user name and password, and then click [Login].

For details about the login user name and password, consult your network administrator.

6Configure settings using Web Image Monitor.

7Click [Logout].

8Quit Web Image Monitor.

9Quit SmartDeviceMonitor for Admin.

Note

  • For details about login user names and passwords, see Security Reference, which is the administrator's manual.

  • For details about Web Image Monitor, see “Using Web Image Monitor”.