Skip header
 

Changing the User Parameters

This section describes how to set parameters.

Important

  • Access to some User Parameter Settings may require options, or other settings may need to be made beforehand.

  • It is recommended that you print and keep a User Parameter list when you program or change a User Parameter.

  • Do not change any bit switches other than those shown on the previous pages.

1Press [Facsimile Features].

2Press [Initial Settings].

3Press [Parameter Setting].

4Select the switch number you want to change.

5Select the bit number you want to change.

When the bit number is pressed, the current value switches between 1 and 0.

Repeat from step 5 to change another bit number for the same switch.

6Press [OK].

To cancel these settings, press [Cancel]. The display returns to that of step 4.

7Repeat step 4 through step 5 to change the switch settings.

8After all the settings are finished, press [Exit].

9Press the [User Tools/Counter] key.