Page Numbering

You can select the page number format given priority when [Page Numbering] is pressed.

The default setting is P1, P2....

The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.

You can select the font in Page Numbering mode.

The default setting is Font 1.

The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.

You can set the size of the stamp printed in Page Numbering mode.

The default setting is Auto.

The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.

You can set the position of the duplex back page number printed in Duplex mode.

The default setting is Opposite Position.

The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.

You can set page numbering when using the Combine function and the Page Numbering function together.

The default setting is Per Original.

The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.

You can select to print the page number onto slip sheets when using the Designate function set to "Copy" and the Page Numbering function together.

The default setting is Off.

The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.

Specify how each of stamp is printed.

• Stamp Position

  Specify where to print the stamp.

  For the patterns of "P1, P2...", "1/5, 2/5...", "P.1, P.2...", and "1, 2...", the machine is shipped from the factory with this position set to Top Right.

  For the patterns of "-1-, -2-..." and "1-1, 1-2...", the machine has this position set to Bottom Center.

• Adjust Stamp Position

  You can adjust the position of the stamp within the available ranges shown below.

  • Metric version:

    "Top Left" - T/B: 4 - 144mm, L/R: 4 - 144mm

    "Top Center" - T/B: 4 - 144mm, L/R: 72 - 72mm

    "Top Right" - T/B: 4 - 144mm, L/R: 4 - 144mm

    "Bottom Left" - T/B: 4 - 144mm, L/R: 4 - 144mm

    "Bottom Center" - T/B: 4 - 144mm, L/R: 72 - 72mm

    "Bottom Right" - T/B: 4 - 144mm, L/R: 4 - 144mm

  • Inch version:

    "Top Left" - T/B: 0.1 - 5.7 inches, L/R: 0.1 - 5.7 inches

    "Top Center" - T/B: 0.1 - 5.7 inches, L/R: 2.8 - 2.8 inches

    "Top Right" - T/B: 0.1 - 5.7 inches, L/R: 0.1 - 5.7 inches

    "Bottom Left" - T/B: 0.1 - 5.7 inches, L/R: 0.1 - 5.7 inches

    "Bottom Center" - T/B: 0.1 - 5.7 inches, L/R: 2.8 - 2.8 inches

    "Bottom Right" - T/B: 0.1 - 5.7 inches, L/R: 0.1 - 5.7 inches

The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.

You can have page numbers printed in white when they overlap black parts of the image.

The default setting is Off.

The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.

You can select the page numbering initial letter between "P1, P2.../P.1, P.2..." and "S1, S2.../S.1, S.2...".

The default setting is P1,P2.../P.1,P.2....

The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.