Skip headerimage
ManualsContentsPreviousNextHelp

Top Page > Copy and Document Server Reference > Copier / Document Server Features > Reproduction Ratio

Reproduction Ratio

This section describes the user tools in the Reproduction Ratio menu under Copier / Document Server Features.

Default settings are shown in bold type.

Shortcut Reduce/Enlarge

You can register up to three frequently used Reduce/Enlarge ratios other than the fixed Reduce/Enlarge ratio and have them shown on the initial display.

You can also change registered Reduce/Enlarge ratios.

When you select [User Reduce/Enlarge Ratio], the ratio can be set from 25.0 to 400.0%, using the number keys.

The default setting for "F1" is 71% (Metric version) / 73% (Inch version).

The default setting for "F2" is 141% (Metric version) / 155% (Inch version).

The default setting for "F3" is 93%.

The main machine applies the setting that has been made on it. Sub-machine settings do not affect connect copy.

Reproduction Ratio

You can specify the enlargement and reduction ratios that appear if [Reduce / Enlarge] is pressed on the copier screen.

Operation panel screen illustration

  • Metric version

    • 25%

    • A3 A5, 8 × 13 A5 (50%)

    • A3 8 × 13 (65%)

    • A3 A4, A4 A5 (71%)

    • B4 JIS 8 × 13 (75%)

    • 8 × 13 A4, B4 JIS A4 (82%)

    • 93%

    • B4 JIS A3 (115%)

    • 8 × 13 A3, A4 B4 JIS (122%)

    • A4 A3, A5 A4 (141%)

    • A5 A3 (200%)

    • 400%

    • User Reduce/Enlarge Ratio (25-400%)

  • Inch version

    • 25%

    • 11 × 17 51/2 × 81/2 (50%)

    • 11 × 17 81/2 × 11 (65%)

    • 11 × 15 81/2 × 11 (73%)

    • 81/2 × 14 81/2 × 11 (78%)

    • 81/2 × 13 81/2 × 11 (85%)

    • 93%

    • 81/2 × 14 11 × 17 (121%)

    • 81/2 × 11 11 × 17 (129%)

    • 51/2 × 8 1/2 81/2 × 14 (155%)

    • 51/2 × 8 1/2 11 × 17 (200%)

    • 400%

    • User Reduce/Enlarge Ratio (25-400%)

The main machine applies the setting that has been made on it. Sub-machine settings do not affect connect copy.

Reduce/Enlarge Ratio Priority

You can set the ratio with priority when [Reduce / Enlarge] is pressed.

The default setting is 71% (Metric version) / 65% (Inch version).

The main machine applies the setting that has been made on it. Sub-machine settings do not affect connect copy.

Ratio for Create Margin

You can set a Reduce/Enlarge ratio when registering Create Margin in a shortcut key.

Enter a ratio using number keys (in the range of 90 to 99%).

The default setting is 93%.

The main machine applies the setting that has been made on it. Sub-machine settings do not affect connect copy.

TopPreviousNext
Copyright (C) 2009