Erase Center / Border

This function erases the center and/or all four sides of the original image.

This function has the following three types:

Erase Border

Erases the edge margin of the original image.

Illustration of Erase Border

Erase Center

Erases the center margin of the original image.

Illustration of Erase Center

Erase Center / Border

Erases both the center and edge margins of the original image.

Illustration of Erase Center/Border

The relationship between the original orientation and the erased part is as follows:

original

original
1. Erased part
2. 2 - 99 mm (0.1 - 3.9 inches)
To erase the image on the back side of the original, press [2 Sided Setting] and then [Back]. Erasing the image on the back side is valid when you copy 2-Sided originals.
The erase width is set to 10 mm (0.4 inch) as a default. You can change this setting under Edit in User Tools. For details about Edit, see "Edit".
The width of the erased margin varies depending on the reproduction ratio.