Skip headerimage
ManualsContentsPreviousNextHelp

Copying onto OHP Transparencies

When copying onto OHP transparencies, select the type and size of paper.

Important

  1. Open the bypass tray, and then insert the paper face up until you hear the beep.

  2. Align the paper guides to the paper size.

  3. Press [Bypass], and then press the [Sharp] key.

  4. Press [Paper Type].

  5. Select [OHP (Transparency)].

    Operation panel screen illustration

  6. Specify the paper size, and then press [OK] twice.

  7. Place the originals, and then press the [Start] key.

Note