Skip header
 

Series Copies

Separately copies the front and back of a 2-sided original or the two facing pages of a bound original onto two sheets.

Important

  • You cannot use the Book 1 Sided function from the ADF.

The following table shows the paper sizes for Book 1 Sided when the reproduction ratio is 100%:

Metric version

Illustration of Series Copies

Inch version

Illustration of Series Copies

There are two types of Series Copies.

Book 1 Sided

You can make 1-sided copies from two facing pages of a bound original (book).

Illustration of Series Copies

2 Sided 1 Sided

You can make 1-sided copies from 2-sided originals.

Illustration of Series Copies

1Press [Dup./Combine/Series].

Operation panel screen illustration

2Press [Series].

3Select [2 Sided 1 Sided] or [Book 1 Sided], and then press [OK].

Operation panel screen illustration

If you specified [2 Sided 1 Sided], you can specify the orientation. For details, see “Originals and Copy Orientation”.

Note

  • When placing originals on the exposure glass, press the [Sharp] key after all originals have been scanned.