Using PostScript 3

Use this function to select the paper type.

In the [Feature Sets] list, select [Paper Type], and then, in the [Media Type] list, select the paper type you want to use for printing.

Use this function to print on both sides of sheets. In the drop-down menu, select [Layout], and then specify the binding pattern in the [Two-sided] area. Both short edge and long edge binding is possible with this function.

Use this function to select the print quality.

In the [Feature Sets] list, select [Imaging], and then, in the [Print Quality] list, select the print quality.

You can select Standard, High Quality, or Best Quality.

Use this function to select the color profile pattern.

In the [Feature Sets] list, select [Imaging], and then, in the [Color Profile] list, select the color profile pattern.

You can select Off, Solid Color, Presentation, or Photographic.

Use this function to simulate the color tone of the printing ink.

In the [Feature Sets] list, select [Imaging], and then, in the [CMYK Simulation Profile] list, select the printing ink standard.

You can select the printing ink standard from Off, US OffsetPrint, Euroscale, or PaletteColor.

Use this function to specify whether or not to print black over other colors.

To enable black text over print, in the [Feature Sets] list, select [Imaging]. Then, set [Black Over Print] to [On].

Use this function to specify the rendering mode.

In the [Feature Sets] list, select [Dithering], and then, in the [Dithering] list, select the rendering mode.

You can select Automatic, Photographic, or Text.

Use this function to specify whether the document is printed in color or black and white.

In the [Feature Sets] list, select [Toner], and then, in the [Color/ Black and White] list, select the toner color.

You can select Automatic, Color, or Black and White.

Use this function to select the black color mode for text and line art.

In the [Feature Sets] list, select [Toner], and then, in the [Gray Reproduction] list, select the black color mode.

You can select Black by K or CMY+K.

Use this function to reduce the amount of toner used when printing.

To reduce toner consumption, in the [Feature Sets] list, select [Toner]. Then set [Toner Saving] to [On].

Use this function to print blank pages.

To print blank pages, in the [Feature Sets] list, select [Toner]. Then set [Print Blank Pages] to [On].

Use this function to select the watermark style.

In the [Feature Sets] list, select [Watermark Text], and then select the watermark type in the list.

You can select Outlined, Solid, or Transparent Text.

Use this function to select the watermark text.

In the [Feature Sets] list, select [Watermark Text], and then select the watermark text in the list.

You can select the following text:

• CONFIDENTIAL

• TOP SECRET

• COPY

• DRAFT

• FINAL

• FILE COPY

• PROOF

Use this function to select the watermark font size.

In the [Feature Sets] list, select [Watermark Text], and then, select the watermark font size in the list.

Use this function to select the watermark font typeface.

In the [Feature Sets] list, select [Watermark Text], and then, select the watermark typeface.

Use this function to select the watermark font shading.

In the [Feature Sets] list, select [Watermark Text], and then, select the watermark font shading in the list.

Use this function to select the watermark position.

In the [Feature Sets] list, select [Watermark Location]. Then, in the [Watermark Position (Horizontal)] and [Watermark Position (Vertical)] lists, select the horizontal and vertical positions, respectively.

Use this function to select the watermark angle.

In the [Feature Sets] list, select [Watermark Location], and then , select the watermark angle in the list.

Use this function to select which page(s) to print the watermark on.

In the [Feature Sets] list, select [Watermark Location], and then, in the [Watermark] list, select which page(s) you want to print the watermark on.

You can select Off, First Page Only, or All Pages.