Setup

Use the following procedure to make network environment settings.

Enable TCP/IP using the control panel, and then set up the printer's network environment about TCP/IP including IP addresses.
TCP/IP of the printer is set as default.
Install a TCP/IP in Windows to set up the network environment.
Consult the network administrator for the local setting information.
To print, install "Printing service for UNIX" as the network application.
- For details about setting up IPv4 address, see Hardware Guide.
- For details about setting the IPv4 address of the printer using DHCP, see Using DHCP.
- This completes the setup for specifying a printer using an IPv4 address when printing. When using a host name to specify a printer, proceed to Using a Host Name Instead of an IPv4 Address and continue the setup.