Changing the paper settings

On the [Paper] page, you can change paper size and other paper settings.

Tray 1

Paper Size
Specify the paper size for tray 1.
A4, B5 JIS, A5, 8 1/2 x 14, 8 1/2 x 11, 7 1/4 x 10 1/2, 8 x 13, 8 1/2 x 13, 8 1/4 x 13, Custom Paper Size
Unit
Specify the unit of measurement in "mm" or "inch".
Horizontal
Specify the horizontal width between 148 and 216 mm (5.83 and 8.50 inches).
Vertical
Specify the vertical length between 210 and 356 mm (8.27 and 14.02 inches).
Paper Type
Specify the paper type for tray 1.
Thin Paper, Plain Paper 1, Plain Paper 2, Recycled Paper, Color Paper, Letterhead, Preprinted Paper, Prepunched Paper

Tray 2

Paper Size
Specify the paper size for tray 2.
A4, 8 1/2 x 11
Paper Type
Specify the paper type for tray 2.
Thin Paper, Plain Paper 1, Plain Paper 2, Recycled Paper, Color Paper, Letterhead, Preprinted Paper, Prepunched Paper

Bypass Tray

Paper Size
Specify the paper size for the bypass tray.
A4, B5 JIS, A5, B6 JIS, A6, 8 1/2 x 14, 8 1/2 x 11, 5 1/2 x 8 1/2, 7 1/4 x 10 1/2, 8 x 13, 8 1/2 x 13, 8 1/4 x 13, 4 1/8 x 9 1/2, 3 7/8 x 7 1/2, C5 Env, C6 Env, DL Env, 16K, Custom Paper Size, Any Size
Unit
Specify the unit of measurement in "mm" or "inch".
Horizontal
Specify the horizontal width between 90 and 216 mm (3.54 and 8.50 inches).
Vertical
Specify the vertical length between 148 and 900 mm (5.83 and 35.43 inches).
Paper Type
Specify the paper type for the bypass tray.
Thin Paper, Plain Paper 1, Plain Paper 2, Recycled Paper, Color Paper, Letterhead, Preprinted Paper, Prepunched Paper, Labels, Bond Paper, Cardstock, Thick Paper 1, Thick Paper 2, Envelope, Any Type

Paper Tray Priority

The tray selected here is used when no tray is specified for a print job.

Tray 2 is available only when the optional paper feed unit is attached to the printer.
Only the PCL6 and PostScript 3 printer driver supports custom size paper longer than 356 mm (14.02 inches). The additional memory unit is required when using the PCL6 printer driver. The additional memory unit might also be required when using the PostScript 3 printer driver, depending on the print data.