Skip headerimage
ManualsContentsPreviousNextHelp

Top Page > Software Guide > Making Printer Settings Using the Control Panel > System Menu > Changing the System Menu

Changing the System Menu

Use the following procedure to change the settings for Energy Saver timer.

  1. Press the [Menu] key.

    image

    The menu screen appears.

  2. Press [Up arrow key] or [Down arrow key] to display [System], and then press the [#Enter] key.

  3. Press [Up arrow key] or [Down arrow key] to display [Energy Saver 2], and then press the [#Enter] key.

  4. Press [Up arrow key] or [Down arrow key] to display [E. Saver2 Timer], and then press the [#Enter] key.

  5. Select the lead time needed to switch to the Energy Saver mode using [Up arrow key] or [Down arrow key].

  6. Press the [#Enter] key.

    The selected lead time is displayed for two seconds with an asterisk, and then the [Energy Saver 2] screen appears.

  7. Press the [Menu] key to return to the initial screen.

TopPreviousNext
Copyright (C) 2008