Skip headerimage
ManualsContentsPreviousNextHelp

Top Page > Software Guide > Other Print Operations > Form Feed > Changing the Paper Input Setting

Changing the Paper Input Setting

Use the following procedure to change the paper input setting of the tray and continue printing.

  1. While an error message is displayed on the control panel, reload the tray you want to use with the correct paper.

    If you reloaded the bypass tray, proceed to step 3..

  2. Press the [Menu] key, press [Up arrow key] or [Down arrow key] to select tray 1 or tray 2, and then press the [#Enter] key.

  3. Press [Up arrow key] or [Down arrow key] to select the paper size, and then press the [#Enter] key.

  4. Press [Up arrow key] or [Down arrow key] to select the paper type, and then press the [#Enter] key.

    Printing starts.

    Note

    • The paper input settings you specify here become the printer's default settings.

    • If you want to print on custom size paper, see Hardware Guide for details about how to specify custom size paper.

TopPreviousNext
Copyright (C) 2008