Installing the PostScript 3 Printer Driver (Windows 2000)

To install this printer driver, you must have an account that has Manage Printers permission. Log on as an administrator or Power Users group member.

If the printer driver has already been installed, plug and play is enabled, and the icon of the printer connected to the "USB" port is added to the [Printers] window.

If the printer driver is not installed, follow the plug-and-play instructions of the printer to install it from the CD-ROM provided.

Check the printer's power switch is turned to off.
Connect the printer and computer using the USB cable.
Connect the USB cable firmly.
Turn the printer's power switch back to on.
The Plug and Play is enabled and the [Found New Hardware Wizard] dialog box appears, and USB Printing Support is installed automatically.
In the [Found New Hardware Wizard] dialog box, click [Search for a suitable driver for my device (recommended)], and then click [Next >].
Select the [Specify location] check box, and then click [Next >].
Insert the CD-ROM into the CD-ROM drive.
When Auto Run starts, click [Exit].
Specify the location where the source files of the printer driver is stored.
If the CD-ROM drive is D, the source files of the PostScript printer driver are stored in the following location:
D:\DRIVERS\PS\XP_VISTA\(Language)\DISK1
Check the printer driver location, and then click [OK].
Click [Next >].
Click [Finish].
If the printer driver has already been installed, plug and play is enabled, and the icon of the printer connected to the "USB001" port is added to the [Printers] window.
- To disable Auto Run, press the [Shift] key when inserting the CD-ROM into the drive and keep it pressed until the computer finishes reading from the CD-ROM.
- The number after "USB" varies depending on the number of printers connected.
- The USB port is available only for the printer driver that is installed first. To install additional drivers for this printer, install them using other ports (such as LPT1). Then, after the installation, change the port settings to the specified USB port.