Skip header
 

Top Page > Software Guide > Mac OS Configuration > Using Smart Organizing Monitor > Printer Configuration > Changing the paper settings

Changing the paper settings

On the [Paper Input] tab, you can change paper size and other paper settings.

Tray 1

  • Paper Size

    Specify the paper size for tray 1.

    A4 (210 x 297 mm), B5 JIS (182 x 257 mm), A5 (148 x 210 mm), 8 1/2 x 14, 8 1/2 x 11, 7 1/4 x 10 1/2, 8 x 13, 8 1/2 x 13, 8 1/4 x 13, Custom Paper Size

  • Paper Type

    Specify the paper type for tray 1.

    Thin Paper, Plain Paper 1, Plain Paper 2, Recycled Paper, Color Paper, Letterhead, Preprinted Paper, Prepunched Paper

  • Custom Paper Size

    Specify the custom paper size, when [Custom Paper Size] is selected.

    • Unit:

      Specify the unit of measurement in "mm" or "inch".

    • Horizontal:

      Specify the horizontal width between 148 and 216 mm (5.83 and 8.50 inches).

    • Vertical:

      Specify the vertical length between 210 and 356 mm (8.27 and 14.02 inches).

Tray 2

  • Paper Size

    Specify the paper size for tray 2.

    A4 (210 x 297 mm), 8 1/2 x 11

  • Paper Type

    Specify the paper type for tray 2.

    Thin Paper, Plain Paper 1, Plain Paper 2, Recycled Paper, Color Paper, Letterhead, Preprinted Paper, Prepunched Paper

Bypass Tray

  • Paper Size

    Specify the paper size for the bypass tray.

    A4 (210 x 297 mm), 8 1/2 x 11, B5 JIS (182 x 257 mm), A5 (148 x 210 mm), B6 JIS (128 x 182 mm), A6 (105 x 148 mm), 8 1/2 x 14, 5 1/2 x 8 1/2, 7 1/4 x 10 1/2, 8 x 13, 8 1/2 x 13, 8 1/4 x 13, 4 1/8 x 9 1/2, 3 7/8 x 7 1/2, C5 Env, C6 Env, DL Env, 16K, Custom Paper Size, Any Size

  • Paper Type

    Specify the paper type for the bypass tray.

    Thin Paper, Plain Paper 1, Plain Paper 2, Recycled Paper, Color Paper, Letterhead, Preprinted Paper, Prepunched Paper, Thick Paper 1, Thick Paper 2, Labels, Bond Paper, Cardstock, Envelope, Any Type

  • Custom Paper Size

    Specify the custom paper size, when [Custom Paper Size] is selected.

    • Unit:

      Specify the unit of measurement in "mm" or "inch".

    • Horizontal:

      Specify the horizontal width between 90 and 216 mm (3.54 and 8.50 inches).

    • Vertical:

      Specify the vertical length between 148 and 900 mm (5.83 and 35.43 inches).

Note

  • Tray 2 is available only when the optional paper feed unit is attached to the printer.

  • Only the PCL6 and PostScript 3 printer driver supports custom size paper longer than 356 mm (14.02 inches). The additional memory unit is required when using the PCL6 printer driver. The additional memory unit might also be required when using the PostScript 3 printer driver, depending on the print data.