When PictBridge Printing Does Not Work

PictBridge is not available.

There is a problem with the USB connection or the PictBridge settings.

Use the following procedure to check the connection and settings:

1. Disconnect and then reconnect the USB cable.

2. Check the PictBridge settings are enabled.

3. Disconnect the USB cable, and then turn off the printer. Turn the printer back on. When the printer has fully booted up, reconnect the USB cable.

When two or more digital cameras are connected, the second and subsequent cameras are not recognized.

You have connected multiple digital cameras.

Connect one digital camera only.

Do not connect multiple cameras.

Printing is disabled.

The specified number exceeds the maximum number that can be printed at a time.

The maximum specifiable print quantity at a time is 999. Respecify the quantity to 999 or less, and then retry printing.

Printing is disabled.

There is no paper of the specified size remaining.

There is no paper of the specified size remaining.

If you have to use paper that is not of the specified size, perform Form Feed. To cancel printing, perform Job Cancel.

Printing is disabled.

The paper size setting for this tray cannot be printed on the printer.

Select the paper size setting that can be printed on the printer.