Skip header
 

Top Page > Hardware Guide > Appendix > Moving and Transporting the Printer

Moving and Transporting the Printer

CAUTION

  • The printer weighs approximately 23 kg (50.6 lb.). When moving the printer, use the inset grips on both sides, and lift slowly in pairs. The printer will break or cause injury if dropped.

  • Unplug the power cord from the wall outlet before you move the machine. While moving the machine, you should take care that the power cord will not be damaged under the machine.

  • When you disconnect the power plug from the wall outlet, always pull the plug (not the cable).

  • When moving the printer after use, do not take out any of the toners, nor the waste toner bottle to prevent toner spill inside the machine.

Repack the printer in its original packing materials for transporting.

Important

  • Be sure to disconnect all cables from the printer before transporting it.

  • The printer is a precision piece of machinery. Be sure to handle it carefully when moving it.

  • If the optional paper feed unit is installed, remove it from the printer, and then move them separately.

  • Do not grip on the tray area when lifting the printer.

Note

  • The printer weighs approximately 23 kg (50.6 lb.).

Related topics

Moving the Printer