



	Contents Previous Next

Top Page > Configuring the Machine Using Web Image Monitor > Checking the System Information > Checking the Status Information

Checking the Status Information

Click the [Status] tab on the main page to display system information, paper tray status and toner levels.

Item	Description
Name	Shows the name of the machine.
Location	Shows the location of the machine as registered on the [SNMP] page.
Contact	Shows the contact information of the machine as registered on the [SNMP] page.
Host Name	Shows the host name used with the current network protocol.
Device Status	Shows the current messages on the machine's display.

Toner
Item	Description
Black Toner	Shows the amount of black toner remaining.
Magenta Toner	Shows the amount of magenta toner remaining.
Yellow Toner	Shows the amount of yellow toner remaining.
Cyan Toner	Shows the amount of cyan toner remaining.
Waste Toner Bottle	Shows the amount of waste toner in the waste toner bottle, as "Status OK", "Near Full" or "Full".

Paper Tray
Item	Description
Tray 1	Shows the current state and paper size/type setting of tray 1.
Tray 2	Shows the current state and paper size/type setting of tray 2.
Bypass Tray	Shows the current state and paper size/type setting of the bypass tray.

The information about tray 2 appears only when it is installed.
If non-genuine print cartridges are installed, toner life cannot be reliably indicated.

For details about location and contact information, see Configuring the SNMP Settings.