Fax Transmission Setting Parameters

Sets the machine to send a fax immediately when the original is scanned.

Default: [Off]

• Off

  Select this when using Memory Transmission.

• On

  Select this when using Immediate Transmission.

• Next Fax Only

  Select this when using Immediate Transmission for the next transmission only.

Specifies the resolution to use for scanning originals.

Default: [Standard]

• Standard

  Select this when the original is a printed or typewritten document with normal-sized characters.

• Fine

  Select this when the original is a document with small print.

• Photo

  Select this when the original contains images such as photographs or shaded drawings.

Specifies the image density to use for scanning originals.

Default: [Normal]

• Light

• Normal

• Dark

Specifies the length of pause time when a pause is inserted between the digits of a fax number.

Default: 3 seconds

• 1 to 15 seconds, in 1 second increments

Sets the machine to redial the fax destination automatically when the line is busy or a transmission error occurs, if the machine is in Memory Transmission mode. The number of redial attempts is preset to two or three times, depending on the [Country Code] setting under [Admin Settings], in five-minute intervals.

Default: [On]

• Off

• On

Sets the machine to add a header to every fax you send. The header includes the current date and time, user fax name and number, job ID, and page information.

Default: [On]

• Off

• On