Skip header
 

Configuring the Network Application Settings

Click the [Network Application] tab on the network settings page to configure the network application settings.

image

Network Scan Settings

Item

Description

E-mail

Select to enable the Scan to E-mail feature.

FTP

Select to enable the Scan to FTP feature.

Folder

Select to enable the Scan to Folder feature.

Max Size

Select the maximum size of scan files that can be attached to an e-mail message (1 to 5 MB, or unlimited).

Network Print Settings

Item

Description

IPP

Select to enable network printing using Internet Print Protocol (via TCP port 631/80).

FTP

Select to enable network printing using an embedded FTP server in the machine (via TCP port 20/21).

RAW

Select to enable network raw printing.

Port #

Enter the TCP port number to use for raw printing. The valid range is 1024 to 65535, except 53550 (default is 9100).

LPR

Select to enable network printing using LPR/LPD (via TCP port 515).

mDNS Setting

Item

Description

mDNS

Select to enable Multicast DNS (via UDP port 5353). If disabled, the item below cannot be configured.

Printer Name

Enter the name of the machine. Can contain up to 32 characters.