Network Setting Parameters
This section describes the network setting parameters.
Ethernet
MAC
Displays the machine's MAC address.
LINK Status
Displays the current Ethernet speed setting.
100M Full Duplex
100M Half Duplex
10M Full Duplex
10M Half Duplex
LINK Setting
Specifies the speed for Ethernet communication. Select a speed that matches your network environment.
For most networks, the default setting is the optimum setting.
Default: [Auto]
Auto
100M Full Dup
100M Half Dup
10M Full Dup
10M Half Dup
IP Configuration
DHCP Activated
Sets the machine to receive its IP address, subnet mask, and default gateway address automatically from a DHCP server.
When DHCP is used, you cannot specify the IP address, subnet mask, or default gateway address manually.
Default: [On]
On
Off
IP Address
Specifies the machine's IP address when DHCP is not used.
Use this menu to check the current IP address when DHCP is used.
Default: 192.0.0.192
Subnet Mask
Specifies the machine's subnet mask when DHCP is not used.
Use this menu to check the current subnet mask when DHCP is used.
Default: 255.255.255.0
Gateway
Specifies the machine's default gateway address when DHCP is not used.
Use this menu to check the current default gateway address when DHCP is used.
Default: 192.0.0.192
IP Source
Displays the IP address acquisition method.
Default: [Default IP]
DHCP
AUTO IP
Manual
Default IP
