Skip header
 

Fax Transmission Setting Parameters

This section describes fax transmission setting parameters.

Immediate TX

Sets the machine to send a fax immediately when the original is scanned.

Default: [Off]

  • Off

    Select this when using Memory Transmission.

  • On

    Select this when using Immediate Transmission.

  • Next Fax Only

    Select this when using Immediate Transmission for the next transmission only.

Resolution

Specifies the resolution to use for scanning originals.

Default: [Standard]

  • Standard

    Select this when the original is a printed or typewritten document with normal-sized characters.

  • Fine

    Select this when the original is a document with small print.

  • Photo

    Select this when the original contains images such as photographs or shaded drawings.

Density

Specifies the image density to use for scanning originals.

Default: [Normal]

  • Light

  • Normal

  • Dark

Pause Key Time

Specifies the length of pause time when a pause is inserted between the digits of a fax number.

Default: 3 seconds

  • 1 to 15 seconds, in 1 second increments

Auto Redial

Sets the machine to redial the fax destination automatically when the line is busy or a transmission error occurs, if the machine is in Memory Transmission mode. The number of redial attempts is preset to two or three times, depending on the [Country Code] setting under [Admin Settings], in five-minute intervals.

Default: [On]

  • Off

  • On

Transmitter Header

Sets the machine to add a header to every fax you send. The header includes the current date and time, user fax name and number, job ID, and page information.

Default: [On]

  • Off

  • On