Skip header
 

Copy Setting Parameters

This section describes the copy setting parameters.

Important

  • Some items might not appear, depending on the model type you are using.

Paper Select

Specifies the paper size used for printing copies.

When a tray is selected, the machine prints from that tray only.

When a paper size is selected, the machine prints from the trays that contain the paper of the specified size, except the bypass tray. If tray 1 and tray 2 both contain the paper of the specified size, the machine starts to print from tray 1. If tray 1 runs out of paper, the machine automatically switches to tray 2 to continue printing. If tray 2 runs out of paper, load paper in tray 1.

If tray 2 is not installed, only [Tray1] and [Bypass Tray] appear.

Default: [Tray1]

  • Tray1

  • Tray2

  • Bypass Tray

  • A4

  • LTR

Sort

Configures the machine to sort the output pages into sets when making multiple copies of a multi-page document (P1, P2, P1, P2...).

Default: [Off]

  • On

  • Off

Quality

Specifies the content of originals, to optimize copy quality.

Default: [Mixed]

  • Text

    Select this when the original contains only text and no photographs or pictures.

  • Photo

    Select this when the original contains photographs or pictures. Use this mode for the following types of original:

    • Photographs

    • Pages that are entirely or mainly photographs or pictures, such as magazine pages.

  • Mixed

    Select this when the original contains both text and photographs or pictures.

Density

Specifies the image density for photocopying.

Default: imageimageimageimageimage

  • imageimageimageimageimage (Lightest)

  • imageimageimageimageimage

  • imageimageimageimageimage

  • imageimageimageimageimage

  • imageimageimageimageimage (Darkest)

Reduce/Enlarge

Specifies a combined copy, or the percentage by which copies are enlarged or reduced.

Default: 100%

  • 50%

  • 65% (image model only)

  • 71% (image model only)

  • 78% (image model only)

  • 82% (image model only)

  • 93%

  • 100%

  • 2in1

    Select this to photocopy two pages of an original onto a single sheet of paper. When selecting this option, also select the orientation.

    • Portrait

      image

    • Landscape

      image

  • 4in1

    Select this to photocopy four pages of an original onto a single sheet of paper. When selecting this option, also select the orientation and layout.

    • Portrait Row

      image

    • Portrait Column

      image

    • Landscape Row

      image

    • Landscape Column

      image

  • 122% (image model only)

  • 129% (image model only)

  • 141% (image model only)

  • 155% (image model only)

  • 200%

  • 400%

  • ID Card Copy

    Sets the machine to copy the front and back sides of an ID card, or other small document, onto the front of a single sheet of paper.

    Note that enabling this setting automatically disables the [Duplex Copy] setting.

    Default: [Off]

    • On

    • Off

  • Custom 25-400%

Color Adjustment

Specify mainly the shade of gray using the color balance of red, green and blue.

Default for all colors: imageimageimageimageimage

  • Red

    • imageimageimageimageimage (Lightest)

    • imageimageimageimageimage

    • imageimageimageimageimage

    • imageimageimageimageimage

    • imageimageimageimageimage (Darkest)

  • Green

    • imageimageimageimageimage (Lightest)

    • imageimageimageimageimage

    • imageimageimageimageimage

    • imageimageimageimageimage

    • imageimageimageimageimage (Darkest)

  • Blue

    • imageimageimageimageimage (Lightest)

    • imageimageimageimageimage

    • imageimageimageimageimage

    • imageimageimageimageimage

    • imageimageimageimageimage (Darkest)

Duplex Copy

Sets the machine to make 2-sided copies by copying single-sided documents onto the front and back sides of the paper.

Note that enabling this setting automatically disables the [ID Card Copy] setting.

Default: [Off]

  • Off

  • Top to Top

    Select this to make 2-sided copies in top-to-top copy orientation. Also, select portrait or landscape for the orientation of the original.

    • Portrait

      image

    • Landscape

      image

  • Top to Bottom

    Select this to make 2-sided copies in top-to-bottom copy orientation. Also, select portrait or landscape for the orientation of the original.

    • Portrait

      image

    • Landscape

      image