Skip header
 

Top Page > Guide to the Machine > Feature Highlights > Using the Machine as a Copier > Copying both sides of an ID card onto one side of paper

Copying both sides of an ID card onto one side of paper

You can copy the front and back sides of an ID card, or other small document, onto one side of a sheet of paper.

Important

  • This function is only available when the original is set on the exposure glass, not when it is set in the ADF.

image

You can either set this machine to always make photocopies in ID card copy mode, or use this function only when necessary.

Preparation for copying an ID card

To always make photocopies in ID card copy mode:

  1. Configure the machine's default [Reduce/Enlarge] setting.

    For details, see Copy Settings.

To use this function for the current job only:

  1. Configure the setting using the [Reduce/Enlarge] key before starting the current job.

    For details, see Copying Both Sides of an ID Card onto One Side of Paper.