![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
This section describes loading envelopes.
This machine can print only on the envelopes listed below. Note that even the envelopes listed here can still become jammed if their flaps are too long or unusually shaped.
Envelope types |
Supported |
---|---|
Supported |
|
Supported |
|
Supported |
To print on envelopes, load them on the bypass tray and be sure to specify the appropriate paper type. See "Copying from the Bypass Tray", Copy Reference and "Setting Paper on the Bypass Tray", Printer Reference.
Specifications for envelopes are as follows:
Metric version |
Inch version |
|
---|---|---|
Weight |
72 - 90 g/m2 |
19 - 24 lb. |
Recommended weight and size |
80 g/m2, 114 × 229 mm (C5/6) 80 g/m2, 114 × 162 mm (C6) 95 g/m2, 162 × 229 mm (C5) |
24 lb., 41/8 × 91/2 (Com10) |
Before loading envelopes, flatten their leading edges (the edge going into the printer) by running a pencil or ruler across them.
Some kinds of envelope might cause misfeeds, wrinkles or print poorly.
Print quality on envelopes may be uneven if parts of an envelope have differing thicknesses. Print one or two envelopes to check print quality.
In a hot and humid environment, the envelope might be output creased or improper printing quality.