Orientation-Fixed Paper or Two-Sided Paper

This section describes loading paper that has a specified orientation and printing side (such as letterhead paper).

Orientation-fixed (top to bottom) or two-sided paper (for example, letterhead paper, punched paper, or copied paper) might not print correctly, depending on how the originals and paper are placed. Set [Letterhead Setting] to [On] under [Copier Features], and then place the original and paper as shown below. For details about Letterhead Setting, see "Copier Features", Copy Reference. For details about printing with the printer function, see "Printer Features", Printer Reference.

Original Orientation

Exposure glass	ADF
^*1	Copier ^*2 Scanner	^*1

Exposure glass

ADF

^*1

Copier ^*2
Scanner

^*1

*1 When making copies using the duplex function in this orientation by setting [Always Specify] for [Orientation] with [Copier Features] in User Tools, specify for the original orientation.

*2 When making copies using the duplex function in this orientation, and loaded paper orientation is , place originals as shown below.

Under [Copier Features], if [Orientation] is set to [Always Specify], load paper in orientation.

Paper Orientation

Illustration of paper orientation

In [Tray Paper Settings] under [System Settings], specify [Letterhead] for "Paper Type" of the paper tray you want to use. This setting is only available when the printer/scanner and fax units are installed. See "Tray Paper Settings", Network and System Settings Guide.