Skip headerimage
ManualsContentsPreviousNextHelp

Custom sizes

When placing a custom size original on the exposure glass or in the ADF, specify the size of the original using the number keys.

Important

  1. Select the paper tray using [Up arrow key] or [Down arrow key].

    Operation panel screen illustration

  2. Press the [Sharp] key.

  3. Select [Custom Size] using [Up arrow key] or [Down arrow key], and then press the [OK] key.

    Operation panel screen illustration

  4. Enter the horizontal size of the original (Horiz.) with the number keys, and then press the [OK] key.

    Operation panel screen illustration

    Exposure glass illustration

    1. Vertical size

    2. Horizontal size

  5. Enter the vertical size of the original (Vert.) with the number keys, and then press the [OK] key.

    Operation panel screen illustration

    The "Programmed" message appears.

    When the custom size originals settings are registered, Operation panel screen illustration appears on the top of the copy display.

    Operation panel screen illustration

Note