Status Messages

"Hex Dump Mode"

In Hex Dump mode, the machine prints received data in hexadecimal format. Turn off the machine after printing, and then turn back on. Hex Dump mode is used for advanced troubleshooting.

"Job Suspended"

Printing was temporarily stopped by SmartDeviceMonitor for Client.

You can resume printing via [My Job List] in SmartDeviceMonitor for Client, or via the Web Image Monitor. To resume printing via Web Image Monitor, check with your system administrator first.

"Offline"

The machine is offline. To start printing, switch the machine online by pressing the [Online] Key.

"Please wait."

This message may appear for a few seconds. It means the machine is initializing or executing maintenance operations. Wait a while.

"Printing..."

The machine is printing. Wait a while.

"Ready"

This is the default ready message. The machine is ready for use. No action is required.

"Resetting job..."

The machine is resetting the print job. Wait until "Ready" appears on the display panel.

"Setting change..."

The machine is setting changing. You cannot use the control panel while this message is displayed. Wait a while.

"Waiting for print data..."

The machine is waiting for the next data to print. Wait a while.