Adjusting the Volume

This section describes how to adjust the volume.

You can change the volume of the following sounds that the machine makes.

On Hook Mode

Heard when the [On Hook Dial] key is pressed.

At Transmission

Heard when "Immediate Transmission" is performed.

At Reception

Heard when the machine receives a document.

At Dialing

Heard after pressing the [Start] key, until the line connects to the destination.

At Printing

Heard when a received document is printed.

Press the [User Tools/Counter] key.
Select [Fax Features] using [] or [], and then press the [OK] key.
Select [General Settings/Adjust] using [] or [], and then press the [OK] key.
Select [Adjust Sound Volume] using [] or [], and then press the [OK] key.
Select the item you want to adjust using [] or [], and then press the [OK] key.
Select the volume using [] or [], and then press the [OK] key.
Press the [Escape] key to cancel the setting and the display returns to that of step 5.
Press the [User Tools/Counter] key.
The standby display appears.

You can also adjust the On Hook volume when you press the [On Hook Dial] key. See "On Hook Dial", Facsimile Reference.
If the extended security function prevents you from changing this setting, contact the administrator.
You can set the volume level to between 0 and 7.