Skip header
 

Top Page > Scanner Reference > Scanner Features > Scan Settings

Scan Settings

This section describes the user tools in the Scan Settings menu under Scanner Features.

Default settings are shown in bold type.

Default Scan Settings

Various basic settings (resolution and scan size) can be set. You can register the scan settings in the same way as specifying them. For details, see "Specifying Send Options".

  • Resolution

    • 100 dpi

    • 200 dpi

    • 300 dpi

    • 400 dpi

    • 600 dpi

  • Scan Size

    • Paper size for setting

      A4, A5, A5, B5 JIS, 81/2×14, 81/2×13, 81/2×11, 51/2×81/2, 51/2×81/2, [Custom Size]

      Custom size paper setting will be as follows: Vertical: 139.0 to 216.0 mm

      (5.5 to 8.5inch), Horizontal: 139.0 to 356.0 mm (5.5 to 14.0 inch)

Original Setting

This setting is available only when you have installed the optional ARDF.

Set the default for whether originals are one-sided or two-sided and if two-sided, the relationship between those sides. When the originals are always the same, set this for the default to make operation easier.

  • 1 Sided Original

  • 2 Sided Orig. (Top to Top Operation panel screen illustration)

  • 2 Sided Orig. (Top to Bottom Operation panel screen illustration)

Orig. Orientation Priority

Select the default for Original Orientation. When originals are always placed in the same way, select that orientation as the default to make operation easier.

Original Type Setting

Make these settings according to the paper type of the original.

Settings made here are assigned to the [Full Colour/B&W] and [Original Type] keys of the scanner function.

  • Type 1 (Colour: Text)

    • Full Colour: Text / Photo

    • Full Colour: Glossy Photo

  • Type 2 (Colour: Photo)

    • Full Colour: Text/Photo

    • Full Colour: Glossy Photo

  • Type 3 (B&W: Text)

    • Text/Line Art

    • Text

    • Text/Photo

    • Photo

    • Gray Scale

  • Type 4 (B&W: Photo)

    • Text/Line Art

    • Text

    • Text/Photo

    • Photo

    • Gray Scale

A.C.S Sensitivity

Specify whether to scan originals in Full Color or Black & White mode.

  • Full Colour Priority

  • Black & White Priority

Blank Page Detect

Use the Blank Page Detect function to prevent blank pages being scanned.

If the first page of the originals is blank, the machine beeps to warn you that you might have placed blank originals.

  • On

  • Off

When the Blank Page Detect function is set to [On], the outermost 1mm of an original’s edge border cannot be scanned.

Blank pages of custom size originals may not be detected.

This function is available only for scanning from the ADF.

The machine cannot perform blank page detection on the second or subsequent pages of an original.

Reference