Skip headerimage
ManualsContentsPreviousNextHelp

Installing the PCL printer driver (TCP/IP)

  1. Quit all applications currently running.

  2. Insert the CD-ROM into the CD-ROM drive.

    The installer starts.

  3. Select an interface language, and then click [OK].

  4. Click [PCL Printer Driver].

  5. The software license agreement appears in the [License Agreement] dialog box.

    After reading the agreement, click [I accept the agreement.], and then click [Next >].

  6. Select the printer driver you want to use in the [Select Program] dialog box.

    You can select several printer drivers.

    The PCL6 printer driver is installed in the language specified by your operating system.

  7. Click [Next >].

  8. Select the machine model you want to use.

    The printer name can be changed in the [Change settings for 'Printer Name'] box.

  9. Double-click the printer name to display the printer settings.

    The details shown in [Comment], [Driver], and [Port] vary depending on the operating system, printer model, and port.

  10. Click [Port], and then click [Add].

  11. Click [SmartDeviceMonitor], and then click [OK].

  12. Click [TCP/IP], and then click [Search].

    A list of printers using TCP/IP appears.

  13. Select the printer you want to use, and then click [OK].

    Only printers that respond to a broadcast from the computer appear. To use a machine not listed here, click [Specify Address], and then enter the IP address or host name of the machine.

  14. Check that the port of the selected printer is displayed in [Port].

  15. Set a user code, if necessary.

    Up to 8 numeric characters can be entered. No alphabetic characters or symbols can be entered.

  16. Select the [Default Printer] check box to configure the printer as default.

  17. Click [Continue].

    Installation starts.

  18. After the installation is completed, select one of the options to restart the computer either now or later, and then click [Finish].

Note