Setting Custom Size Paper Using the Control Panel
Follow the procedure below to set the machine using the control panel when loading custom size paper onto the bypass tray.
The following procedures are not required if you select [Driver/Command] from [Bypass Tray Priority] in [System] of [Printer Features] (see "Printer Features"). In that case, set the paper size using the printer driver.
If you select [Machine Settings] from [Bypass Tray Priority] in [System] of [Printer Features] (see "Printer Features"), the settings made using the control panel have priority over the printer driver settings.
If the printer driver is not used, select [Machine Settings] from [Bypass Tray Priority] in [System] of [Printer Features] (see "Printer Features"). Set paper size using the control panel.
Press the [User Tools/Counter] key on the control panel.
Press the [
] or [
] key to select [System Settings], and then press the [OK] key.
Press the [] or [] key to select [Tray Paper Settings], and then press the [OK] key.
Press the [] or [] key to select [Printer Bypass Paper Size], and then press the [OK] key.
Press the [], [], [
], or [
] key to select the [Custom Size], and then press the [OK] key.
Enter the horizontal size of the paper using the number keys, and press [OK] key.
Enter the vertical size of the paper using the number keys, and press [OK] key.
Press the [User Tools/Counter] key to return to the initial screen.
When loading thick paper, thin paper, or OHP transparencies, set paper size and paper type.
[Auto Detect] is the default setting for [Printer Bypass Paper Size].
For details about setting printer drivers, see the printer driver Help.
