



	Manuals Contents Previous Next

Top Page > Network and Syetem Settings Guide > Registering Addresses and Users for Facsimile/Scanner Functions > Registering Folders > Registering an SMB Folder > Locating the SMB folder manually

Locating the SMB folder manually

This section describes how to locate the SMB folder manually.

Select [Manual Entry] using [] or [], and then press the [OK] key.
Enter the path and then press the [OK] key.
If the format of the entered path is not correct, a message appears. Press [Exit], and then enter the path again.

Enter the path using this format: "\\ServerName\Share- Name\PathName".
You can also enter an IPv4 address.
You can enter a path using up to 128 characters.