Skip headerimage
ManualsContentsPreviousNextHelp

spoolsw

Use the "spoolsw" command to view and configure Job Spool settings.

You can only specify diprint, trap, lpr, ipp, ftp, sftp, wsd (printer), and smb (TCP/IP) protocol.

View settings

The Job Spool setting appears.

msh> spoolsw

Job Spool setting

msh> spoolsw spool {on|off}

  • Specify "on" to enable Job Spool, or "off" to disable it.

Resetting Job spool setting

msh> spoolsw clear job {on|off}

  • When the printer power is cut during job spooling, this determines whether to reprint the spooled job.

Protocol configuration

msh> spoolsw diprint {on|off}

msh> spoolsw lpr {on|off}

msh> spoolsw ipp {on|off}

msh> spoolsw smb {on|off}

msh> spoolsw ftp {on|off}

msh> spoolsw sftp {on|off}

msh> spoolsw wsprn {on|off}