Manuals
Contents
Previous
Next
| | | |
| |||
| |||
| | | |
| ManualsContentsPreviousNext | | |
This section lists the settings required for using the network TWAIN Scanner with an Ethernet connection.
For details about how to specify the settings, see "Interface Settings".
Menu |
User Tool |
Setting Requirements |
|---|---|---|
Interface Settings/Network |
Machine IPv4 Address |
Necessary |
Interface Settings/Network |
DNS Configuration |
As required |
Interface Settings/Network |
DDNS Configuration |
As required |
Interface Settings/Network |
IPsec |
As required |
Interface Settings/Network |
Domain Name |
As required |
Interface Settings/Network |
WINS Configuration |
As required |
Interface Settings/Network |
Effective Protocol |
Necessary |
Interface Settings/Network |
Ethernet Speed |
As required |
Interface Settings/Network |
IEEE802.1X Auth.(Ethernet) |
As required |
Interface Settings/Network |
LAN Type |
Necessary |
Interface Settings/Network |
Permit SNMPv3 Communictn. |
As required |
Interface Settings/Network |
Permit SSL/TLS Comm. |
As required |
Interface Settings/Network |
Host Name |
As required |
For the Effective Protocol setting, check that the protocol you want to use is set to [Active].
[LAN Type] is displayed when the wireless LAN interface board is installed.
When both Ethernet and wireless LAN are connected, the selected interface takes precedence.
 |
 | Copyright (C) 2008 |
