Ethernet
This section lists the settings required for delivering data to the network with an Ethernet connection.
For details about how to specify the settings, see "Interface Settings" and "File Transfer".
Menu |
User Tool |
Setting Requirements |
|---|---|---|
Interface Settings/Network |
Machine IPv4 Address |
Necessary |
Interface Settings/Network |
IPv4 Gateway Address |
As required |
Interface Settings/Network |
Machine IPv6 Address |
As required |
Interface Settings/Network |
IPv6 Gateway Address |
As required |
Interface Settings/Network |
IPv6 Stateless Setting |
As required |
Interface Settings/Network |
DNS Configuration |
As required |
Interface Settings/Network |
DDNS Configuration |
As required |
Interface Settings/Network |
IPsec |
As required |
Interface Settings/Network |
Domain Name |
As required |
Interface Settings/Network |
WINS Configuration |
As required |
Interface Settings/Network |
Effective Protocol |
Necessary |
Interface Settings/Network |
Ethernet Speed |
As required |
Interface Settings/Network |
IEEE802.1X Auth.(Ethernet) |
As required |
Interface Settings/Network |
LAN Type |
Necessary |
Interface Settings/Network |
Permit SNMPv3 Communictn. |
As required |
Interface Settings/Network |
Permit SSL/TLS Comm. |
As required |
Interface Settings/Network |
Host Name |
As required |
File Transfer |
Delivery Option |
Necessary |
For the Effective Protocol setting, check that the protocol you want to use is set to [Active].
[Wireless LAN] and [LAN Type] are displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN are connected, the selected interface takes precedence.
If Delivery Option is set to [On], check that IPv4 Address is specified.
