Guide to Components

ADF

If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one. See "External items".

This document feeder can be used for two-sided originals.

Exposure glass

Place originals here face down.

Internal tray guide

Open out and raise the end fence to support large paper.

Ventilation holes

Prevent overheating.

Main power switch

If the machine does not operate after turning on the operation switch, check if the main power switch is turned on. If it is off, turn it on. See "Turning On/Off the Power".

Main power indicator

Lights when the main power switch is turned on, and goes off when the switch is turned off.

Operation switch

Press to turn the power on (the operation switch indicator lights up). To turn the power off, press again (the operation switch indicator goes off). See "Turning On/Off the Power".

Control panel

See "Control Panel".

Internal tray

Copied/printed paper and fax messages are delivered here.

Front cover

Open to access the inside of the machine.

Paper tray

Load paper here.

Paper tray unit (Tray 2 and Tray 3)

See "External items".

Right cover

Open this cover to remove jammed paper fed from the paper tray.

Bypass tray

Use to copy or print onto OHP transparencies, adhesive labels, translucent paper, envelopes, and custom size paper.

Lower right covers

Open these covers to remove jammed paper fed from the paper tray unit (Tray 2 and Tray 3).