Loading Paper into the Paper Trays
This section describes how to load paper into the paper trays.
Various sizes of paper can be loaded in the paper trays by adjusting the positions of side fences and end fence.
Check the paper edges are aligned with the right side.
Do not stack paper over the limit mark.
Carefully pull out the paper tray until it stops.
Press the metal plate down until it clicks.
Square the paper and load it print side up.
Do not stack paper over the limit mark.
Carefully push the paper tray fully in.
The illustrations above show Tray 1.
When using the optional paper tray unit (Tray 2 and Tray 3), load paper flush against the right side of the tray. Space between the paper and the tray's sides can cause misfeeds.
