Skip headerimage
ManualsContentsPreviousNextHelp

Home Position Parameter List

For details about setting parameters, see "Parameter Settings".

Do not change switches other than those listed.

Switch: 00, Bit: 3, 2, 1

Allows one of five image density steps to be set as the home position.

  • 000: Normal density

  • 001: The lightest density

  • 010: The darkest density

  • 101: Lighter density

  • 110: Darker density

Switch: 00, Bit: 5, 4

Allows Standard, Details, or Fine to be set as the home position.

  • 00: Standard

  • 01: Detail

  • 10: Fine

Switch: 01, Bit: 1, 0

Allows Text or Photo to be set as the home position.

  • 00: Text

  • 01: Photo

Switch: 02, Bit: 1

Allows either Immediate Transmission or Memory Transmission to be set as the home position.

  • 0: Memory transmission

  • 1: Immediate transmission

Switch: 02, Bit: 2

Allows the label insertion as the home position to be set to on or off.

  • 0: Off

  • 1: On

Switch: 02, Bit: 6, 5

Allows the fax header as the home position to be set to on or off.

  • 00: Off

  • 01: On

Reference