ManualsContentsPreviousNext |
Use this function to display the transmission results.
Press the [Job Information] key.
Select [TX File Status] using [] or [], and then press the [OK] key.
Check the transmission results using [] or [].
When a fax is sent, the Own Fax Number or Own Name information of the receiver appears. When an Internet Fax is sent, the e-mail address you entered or the name programmed in the machine's destination list appears. For a transmission from a computer, "-- LAN-Fax -->" is shown.
Press the [Escape] key twice.
The standby display appears.
Only the transmission results of the latest communications are displayed. For the maximum number of communication results you can check on this machine, see "Maximum Values".
You can view sent fax documents and their lists, using Web Image Monitor on a network computer. For details, see the Web Image Monitor's Help.
If a transmission is completed while you are using this function, the result will not appear. To view the latest result, exit TX File Status, and then try again.
You can program one of the User Function keys with operations for this function. Using the key allows you to omit steps 1 and 2. For details about the User Function keys, see "General Settings/Adjust".
When documents are transmitted from the computer to the machine, "--LAN-Fax -->" appears. To check if the documents are sent to the receiver, confirm the same File No.