Paper Size and Scanned Area
This section explains the size of the area the machine can scan and detect.
There may be a difference in the size of the image when it is printed at the destination.
Even if an original is correctly placed on the exposure glass or in the ADF, a margin of 3 mm (0.1 inch) around each edge of the original may not be sent.
If the receiver uses paper of a smaller width than the original, the image is reduced to fit that paper.
Originals placed face down on the exposure glass are scanned at A4 (81/2 × 11). To scan originals at 81/2 × 14, change the paper size setting with User Parameters (switch 32, bit 1) in the Fax Features menu. See “Parameter Settings”.
