Skip headerimage
ManualsContentsPreviousNextHelp

Function Compatibility

The combination chart given below shows which modes can be used together.

Blank: These modes can be used together.

image: These modes cannot be used together. The second mode selected will be the mode you are working in.

The following shows the combinations of functions:

Illustration of function compatibility

*1 A function incompatibility message appears if you load a sheet that exceeds 357 mm (14 inches) with the two-sided original function. Copying is not possible until one of the functions is disabled.

*2 A function incompatibility message appears if you load a sheet that exceeds 357 mm (14 inches). Copying is not possible until one of the functions is disabled.

*3 The mode selected second changes the reduce/enlarge ratio.

*4 A function incompatibility message appears if you select two conflicting functions. Copying is not possible until one of the functions is disabled.