![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
When using the wireless LAN interface on the network, note the following:
When moving the printer
Detach the antennas when relocating the printer locally.
After moving the printer, reattach the antennas, ensuring that:
The antennas are positioned clear of obstacles.
There is 40 to 60 mm between the antennas, so that they do not touch.
If the network area provides poor radio environment
Where radio wave conditions are bad, the network may not function due to interrupted or failed connections. When checking the wireless LAN signal and the access point, follow the procedure below to improve the situation:
Position the access point nearer to the printer.
Clear the space between access point and printer of obstructions.
Move radio wave generating appliances, such as microwaves, away from the printer and access point.
For information about how to check radio wave status, see "Wireless LAN Configuration", Hardware Guide.
For more information about access point radio wave conditions, refer to the access point manual.