![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
Plain Paper Setting
You can select the type of plain paper.
Tray 1
Plain Paper 1, Plain Paper 2
Tray 2
Plain Paper 1, Plain Paper 2
Tray 3
Plain Paper 1, Plain Paper 2
Tray 4
Plain Paper 1, Plain Paper 2
Tray 5
Plain Paper 1, Plain Paper 2
Bypass Tray
Plain Paper 1, Plain Paper 2
Default: Plain Paper 1
Letterhead Setting
You can select the letterhead printing mode.
Tray 1
Letterhead 1, Letterhead 2, Letterhead 3
Tray 2
Letterhead 1, Letterhead 2, Letterhead 3
Tray 3
Letterhead 1, Letterhead 2, Letterhead 3
Tray 4
Letterhead 1, Letterhead 2, Letterhead 3
Tray 5
Letterhead 1, Letterhead 2, Letterhead 3
Bypass Tray
Letterhead 1, Letterhead 2, Letterhead 3
Default: Letterhead 1
Coated Paper Setting
You can select the coated paper printing mode.
Tray 1
Coated Paper 1, Coated Paper 2, Coated Paper 3, Coated Paper 4, Coated Paper 5, Coated Paper 6, Coated Paper 7
Tray 2
Coated Paper 1, Coated Paper 2, Coated Paper 3, Coated Paper 4, Coated Paper 5, Coated Paper 6, Coated Paper 7
Tray 3
Coated Paper 1, Coated Paper 2, Coated Paper 3, Coated Paper 4, Coated Paper 5, Coated Paper 6, Coated Paper 7
Tray 4
Coated Paper 1, Coated Paper 2, Coated Paper 3, Coated Paper 4, Coated Paper 5, Coated Paper 6, Coated Paper 7
Tray 5
Coated Paper 1, Coated Paper 2, Coated Paper 3, Coated Paper 4, Coated Paper 5, Coated Paper 6, Coated Paper 7
Bypass Tray
Coated Paper 1, Coated Paper 2, Coated Paper 3, Coated Paper 4, Coated Paper 5, Coated Paper 6, Coated Paper 7
Default: Coated Paper 1
Replacement Alert
Use this function to specify the timing to notify user when supplies need to be replaced. Settings can be made separately for photo conductor unit, intermediate transfer unit, or fusing unit.
Photoconductor Unit
Notify Sooner, Normal, Notify Later
Default: Normal
Intermediate Transfer Unit
Notify Sooner, Normal, Notify Later
Default: Normal
Fusing Unit
Notify Sooner, Normal, Notify Later
Default: Normal
Supply End Option
You can specify whether or not to continue printing after the photoconductor exceeds its service life.
Continue Printing
Stop Printing
Default: Continue Printing
Display Supply Info
You can select whether or not to display the amount of toner on the initial screen.
On
Off
Default: On
Menu Protect
You can select whether or not to protect menu. When you enable this setting, specify protection level.
Level 1
Level 2
Off
Default: Level 2
If you would like to lower the protection level, disable this setting or select [Level 1].
You may not be able to change this setting depending on the setting of the printer.
List/Test Print Lock
You can select whether or not to prohibit List/Test printing.
On
Off
Default: Off
You may not be able to change this setting depending on the setting of the printer.
Unit of measure
You can specify the unit for measurement.
mm
inch
Default:
mm ()
inch ()
Panel Key Sound
You can select whether or not to enable the panel key sound.
On
Off
Default: On
Warm-up Beeper
You can select whether or not to sound the beeper when the printer has completed a warm-up process.
On
Off
Default: On
Display Contrast
You can specify the density of the display.
Key Repeat
You can specify whether or not to scroll the display panel when the [] or [
] key is held down. When you enable this setting, specify the scroll speed. (If repeat time is set to "Long", scroll speed becomes slow.)
Do not Repeat
Normal
Repeat Time: Medium
Repeat Time: Long
Default: Normal