ManualsContentsPreviousNext |
The specified punch position varies depending on paper feed and print data orientation. The following table shows punch positions:
Punch Position
Holes Type (Booklet Finisher SR3000 and Finisher SR3030)
Type |
Paper Size |
---|---|
2 holes |
A3, A4 *1, A5, B4 JIS, B5 JIS, 12" × 18" *2, 11" × 17", 81/2" × 14", 81/2" × 13", 81/2" × 11", 81/4" × 13", 8" × 13", 71/4" × 101/2", 51/2" × 81/2", 8K, 16K |
3 holes |
A3, A4, B4 JIS, B5 JIS, 12" × 18" *2, 11" × 17", 81/2" × 11", 71/4" × 101/2", 8K, 16K |
EU 4 holes |
A3, A4, B4, B5 JIS, 12" × 18" *2, 11" × 17", 81/2" × 11", 71/4" × 101/2", 8K, 16K |
Northern EU 4 holes |
A3, A4, A5, B4 JIS, B5 JIS, 12" × 18"*2, 11" × 17", 81/2" × 14", 81/2 " × 13", 81/2" × 11", 81/4" × 13", 8" × 13", 71/4" × 101/2", 51/2" × 81/2", 8K, 16K |
*1 Punching on A4 is not available when the model is used with Finisher SR3030 .
*2 Punching on 12" × 18" is available only for Finisher SR3030.
Punch positions will vary slightly from page to page as holes are punched into each sheet individually.
For printing methods, see the printer driver Help.