Skip header
ManualsContentsPreviousNextHelp

dhcp

Use the "dhcp" command to configure DHCP settings.

View settings

The following command displays the current DHCP settings.

msh> dhcp

Configuration

You can configure DHCP.

msh> dhcp "interface_name" {on|off}

  • Click {on} to enable DHCP. Click {off} to disable DHCP.

  • If the DNS server address and domain name are obtained from DHCP, be sure to click {on}.

  • wlan can be specified only when the wireless LAN interface unit is installed.

    Interface name

    Interface configured

    ether

    Ethernet interface

    wlan

    Wireless LAN interface

Current interface priority configuration display

msh> dhcp priority

Interface priority configuration

msh> dhcp priority "interface_name"

  • You can select which interface has DHCP parameter priority.

  • Priority settings are available when multiple interfaces are installed.

DNS server address selection

msh> dhcp dnsaddr {dhcp | static}

  • Specify whether to obtain the DNS server address from the DHCP server or use the address set by a user.

  • To obtain the DNS server address from the DHCP server, specify "dhcp". To use the address set by a user, specify "static".

Domain name selection

msh> dhcp domainname {dhcp | static}

  • Specify whether to obtain the domain name from the DNS server or use the domain name set by a user.

  • To obtain the domain name from the DHCP server, specify "dhcp". To use the domain name set by a user, specify "static".