Skip header
 

Top Page > Software Guide > Printing Documents > Advanced Printing > Punch > Punch position

Punch position

The specified punch position varies depending on paper feed and print data orientation. The following table shows punch positions:

Punch Position

Illustration of punch position

Holes Type (Booklet Finisher SR3000 and Finisher SR3030)

Type

Paper Size

2 holes

A3Landscape, A4PortraitLandscape *1, A5PortraitLandscape, B4 JISLandscape, B5 JISPortraitLandscape, 12" × 18"Landscape *2, 11" × 17"Landscape, 81/2" × 14"Landscape, 81/2" × 13"Landscape, 81/2" × 11"PortraitLandscape, 81/4" × 13"Landscape, 8" × 13"Landscape, 71/4" × 101/2"PortraitLandscape, 51/2" × 81/2"Landscape, 8KLandscape, 16KPortraitLandscape

3 holes

A3Landscape, A4Portrait, B4 JISLandscape, B5 JISPortrait, 12" × 18"Landscape *2, 11" × 17"Landscape, 81/2" × 11"Portrait, 71/4" × 101/2"Portrait, 8KLandscape, 16KPortrait

EU 4 holes

A3Landscape, A4Portrait, B4Landscape, B5 JISPortrait, 12" × 18"Landscape *2, 11" × 17"Landscape, 81/2" × 11"Portrait, 71/4" × 101/2"Portrait, 8KLandscape, 16KPortrait

Northern EU 4 holes

A3Landscape, A4PortraitLandscape, A5PortraitLandscape, B4 JISLandscape, B5 JISPortraitLandscape, 12" × 18"Landscape*2, 11" × 17"Landscape, 81/2" × 14"Landscape, 81/2 " × 13"Landscape, 81/2" × 11"PortraitLandscape, 81/4" × 13"Landscape, 8" × 13"Landscape, 71/4" × 101/2"PortraitLandscape, 51/2" × 81/2"Landscape, 8KLandscape, 16KPortraitLandscape

*1 Punching on A4Landscape is not available when the 120v model is used with Finisher SR3030 .

*2 Punching on 12" × 18"Landscape is available only for Finisher SR3030.

Note

  • Punch positions will vary slightly from page to page as holes are punched into each sheet individually.

  • For printing methods, see the printer driver Help.