Skip header
 

Top Page > Software Guide > Printing Documents > Advanced Printing > Staple > Staple position

Staple position

The specified staple position varies depending on paper size, type, quantity and feed orientation. The following table shows staple positions:

Staple Position

Illustration of staple position

Staple Capacity (Booklet Finisher SR3000)

Paper Size

Staple Capacity

A3Landscape, B4 JISLandscape, 11" × 17"Landscape, 81/2" × 14"Landscape, 81/2" × 13"Landscape, 81/4" × 13"Landscape, 8" × 13"Landscape, 8KLandscape

30

A4PortraitLandscape, B5 JISPortraitLandscape, 81/2" × 11"PortraitLandscape, 71/4" × 101/2"PortraitLandscape, 16KPortraitLandscape

50

Staple Capacity (Finisher SR3030)

Paper Size

Staple Capacity

A3Landscape, B4 JISLandscape, 12" × 18"Landscape, 11" × 17"Landscape, 81/2" × 14"Landscape, 81/2" × 13"Landscape, 81/4" × 13"Landscape, 8"×13"Landscape, 8KLandscape

30

A4PortraitLandscape, B5 JISPortraitLandscape, 81/2"×11"PortraitLandscape, 71/4" × 101/2"PortraitLandscape, 16KPortraitLandscape

50

Mixed Size

Mixed Paper Size

Staple Capacity (Booklet Finisher SR3000)

Staple Capacity (Finisher SR3030)

A3Landscapeand A4Portrait

22

30

B4 JISLandscape and B5 JISPortrait

22

30

11" × 17"Landscape and 81/2" × 11"Portrait

22

30

81/2" × 14"Landscape, 81/2" × 13"Landscape, and 81/2" × 11"Landscape

22

30

Note

  • When two-sided printing is selected, adjust the staple position to the binding direction.

  • If you are punching at the same time, specify the same side.

  • For printing methods, see the printer driver Help.