Skip headerimage
ManualsContentsPreviousNextHelp

Adding Toner

WARNING

CAUTION

Important

Replace the toner when the following message appears on the display:

Operation panel screen illustration

Operation panel screen illustration

When the following message appears on the display, the toner should be replaced soon. Prepare a new toner.

Operation panel screen illustration

  1. Holding the left and right side grips, carefully open the front cover.

    Exterior front view illustration

    From the left, the toner is installed in the order of black (K), yellow (Y), cyan (C), and magenta (M).

    Toner illustration

  2. Holding the toner of the color to replace, pull it out carefully.

    Toner illustration

    Do not shake the removed toner. Any remaining toner may leak.

    Pull the toner out slowly and carefully to prevent leakage.

    Place the old toner on paper or some other material to avoid dirtying your workspace.

  3. Take the new toner out of the box.

  4. Shake the toner up and down five or six times.

    Toner illustration

    Even distribution of toner within the container improves print quality.

  5. With the label facing up, fully insert toner into place, keeping the container horizontal.

    Toner illustration

    Do not install and remove toner repeatedly. Doing so results in toner leak.

  6. Carefully close the front cover.

    Wait until "Icon Loading toner" disappears from the display.

Note