Coated paper: gloss print

Printer setup

Select [Paper Input] [Paper Type: (tray name)] [Coated Paper: Gloss Print].

Printer driver setup

Select [Coated paper: gloss print] in [Paper type].

Supported paper feeding tray

Any input tray can be used.

Make sure paper is not stacked higher than the upper limit mark () inside the tray. When using the bypass tray, make sure paper is not stacked higher than the paper guides inside it.

Duplex printing

Not supported

Additional cautions

• Print speed is slightly slower than when using plain paper.

• If the paper is curled, flatten it before loading.

• Fan the paper before loading it. When using the bypass tray, set the paper one page at a time if multiple sheets are fed, paper jams occur, or you hear a strange noise.